10 Best Carpet For High Traffic Stairs
Updated on: September 2023
Best Carpet For High Traffic Stairs in 2023
Resolve High Traffic Carpet Foam, Crisp Linen 88 oz (4 Cans x 22 oz), Cleans Freshens Softens & Removes Stains
iCustomRug Spartan Weather Warrior Duty Indoor/Outdoor Utility Berber Loop Carpet Runner, Area Rugs, 3ft,4ft,6ft Widths 70 Custom Sizes with Natural Non-Slip Rubber Backing 3' X 12' in Black

- CHOOSE YOUR WIDTH (3FT, 4FT AND 6FT WIDTHS) AND CUSTOM LENGTH - Great for hallway, entranceway, vestibule, deck, outdoor stairs, boats and more
- EXTREMELY STAIN RESISTANT - Made from polyester and polypropylene fibers suitable for commercial and residential use
- UTILITY TOUGH - GREAT FLOOR PROTECTION - Protect your floor from dirt, slush, and snow, and heavy traffic
- NON-SKID NATURAL RUBBER BACKING - Easy to install - Cut with scissors to length - can be used as stair treads
- iCustomRug is a highly trusted brand /manufacturer providing quality and style in home area rugs, runners and mats. Buy direct from us, the ONLY authorized seller - Proudly manufactured in Canada
Resolve High Traffic Carpet Foam, 88 oz (4 Cans x 22 oz), Cleans Freshens Softens & Removes Stains

- High-traffic & large area carpet cleaner that cleans, freshens & softens
- 3X more dirt removal than vacuuming alone
- Removes more dirt vs previous Resolve High Traffic Foam formula
- Safely cleans, deodorizes & helps prevent future soils
- Great for: Ground-in dirt. Refill for the Easy Clean Pro. Great for those frequently used areas like stairs, hallways, area rugs and more
Woolite 08209 Heavy Traffic Carpet Foam Cleaner Stain Remover, 4 pack

- 5x action Deep cleaning foam - cleans and softens Area rugs, carpet, heavy traffic areas and more
- Eliminate pet odors
- Soften carpet as it cleans
- Remove more dirt
- Protects against stains and soils on carpet with Scotchgard - the only foam in category that cleans and protects
Resolve High Traffic Carpet Foam, 22 oz Can, Cleans Freshens Softens & Removes Stains (Pack of 4)

- High-traffic & large area carpet cleaner that cleans, freshens & softens.
- 3X more dirt removal than vacuuming alone!
- Removes more dirt vs previous Resolve High Traffic Foam formula.
- Safely cleans, deodorizes & helps prevent future soils.
- Great for: Ground-in dirt. Refill for the Easy Clean Pro. Great for those frequently used areas like stairs, hallways, area rugs and more.
Resolve Pet High Traffic Carpet Foam, 88 oz (4 Cans x 22 oz), Cleans Freshens Softens & Removes Stains

- Pet Expert high traffic carpet foam cleans pet messes the 1st time
- Remove 3X more pet hair & removes 3X dirt vs vacuuming alone
- Patented Odor Stop Technology helps eliminate pet odors
- Helps to Protect against pet stains like urine, vomit, feces and tracked-in dirt
- Great for: Ground-in dirt. Refill for the Easy Clean Pro. Great for those frequently used areas like stairs, hallways, area rugs and more. Safe to use on wool, nylon and stain-resistant carpet. Helps prevent future resoling
AmazonBasics Poly Linear-Rib Commercial Carpet Vinyl-Backed Mat 3X4 Pepper

- Linear-rib polyester carpet mat with vinyl backing for commercial or home use
- Catches dirt and moisture from being tracked into any room
- Can be used as an anti-fatigue mat for standing work environments
- Heavy-duty construction withstands daily use and stands up to wear and tear
- Non-slip backing keeps mat firmly in place on a variety of surfaces
- Use in entryways, hallways, behind counters, at workstations, and more
Ottomanson Softy Solid Dark Grey Set of 14 Skid Resistant Rubber Backing Non Slip Carpet (9"x26") Mats 14 Piece Set 9 Inch by 26 Inch Stair Tread, 9" X 26, Gray

- Non-slip rubber backing to provide skid resistance for you and safety grip for pets and dogs
- Durable machine-made soft plush pile which is stain resistant and easy to maintain
- Bound on all edges to prevent fraying
- Provides safe traction and stability on any floor type including hardwood tile stone and marble stairs/steps
- Protects your stairs from scratches wear and tear and reduces noise
- 100% confidence in our products and completely free returns
Resilia - Clear Vinyl Plastic Floor Runner/Protector for Low Pile Carpet - Non-Skid Decorative Pattern, (27 Inches Wide x 25 Feet Long)

- PROTECTS HARDFLOORS: Protect surfaces from dings, scratches, wear and spills
- DOES NOT SLIDE: Will not slide on tile, wood or other smooth surfaces, not intended for use over carpet
- CUTS EASILY: Easily cuts with scissors or utility knife to create a custom size for your project needs
- ENVIRONMENTALLY FRIENDLY: Heavy duty, recycled, phthalate free, eco-friendly, flexible PVC vinyl - Does not contain any Prop 65 regulated contaminants
- MADE IN USA: Family owned, operated and made entirely in the USA
STAINMASTER Carpet Cleaner, High Traffic Foam Cleaner, 22 Fl Oz

- STAINMASTER Carpet High Traffic Cleaner lifts dirt from carpet for a quick, easy clean every time.
- Removes fresh and ground-in dirt and protects carpet from tracked-in dirt with an invisible barrier.
- Freshens and cleans carpet in your most frequently used household areas with a fresh, light scent.
- Perfect for heavy traffic areas like hallways, landings, stairs and other frequently used areas.
- 1 STAINMASTER Carpet High Traffic Cleaner Foam Aerosol 22 OZ Spray Bottle
How to Build Wood Stairs
Instructions for building wooden stairs.
To begin, a couple of measurements must be made.
The first measurement is called rise. Rise is the measurement from the top landing to the floor at the bottom.
The second is run. Run is the length of the stairs. To measure run you need to plumb a line down from the face of your upper landing to the floor beneath. Put a mark on the lower floor where the plumb bob hits. Now measure from this line to where you want the stairs to end. This dimension is your run.
For the purposes of this article I'm going to use 96" as a rise and 120" as a run
I usually start at about 14 risers. So if you take our rise of 96" and divide by 14 you get 6.85". Changing to a fraction that is 6-13/16". That would actually work but I would like the rise to be at 7" or a bit above 7". So rather than dividing by 14 I will divide by 13. So if you take our rise of 96" and divide by 13 we get 7.384. That in a fraction is about 7-3/8" which I like better. So we will have 13 risers at 7-3/8" each.
Now for the run. The only fast and hard rule about run is it is always one less than rise. So, being that we determined we were using 13 rise we will automatically know were going to have 12 run. Using our run measurement of 120" we will divide that by 12 which comes out to 10". That is the width of each stair tread.
Why is run always one less than rise? Because when we nail our stringers up they will be mounted one step down. The space above the top step to the landing above is counted when we divide up our risers.
If the stairs are going to include risers you need to adjust the cut in the stringer. The most common riser width would be .75" so in the example above we need to add the .75 to our tread width of 10 inches now making it 10.75".
Now on to the stringers. Usually with standard stairs you will need to use a 2x10 or a 2x12 for the stringer. Being that we are going to be cutting triangles out of this stringer determined by our dimensions above we need enough wood left to be safe. In most areas here in the USA you need 4" of width left after the triangles are cut out to abide by building codes. As always it's best to check with your local building department for the rules in your area.Put a mark on the square at the rise dimension and the run dimension. You can purchase stair chairs if your going to be doing a lot of stairs in the future. Stair chairs are small clamps that connect to your building square. You can set them at any dimension on your square for repeatability. Mark out the stringer using the marks you made on the square. Start with the rise dimension on the square closest to the top of the stringer. Mark the triangle on the stringer. Slide down and mark again. You will end up with a zigzag pattern all the way down. You will have to square back the line at the very top and bottom. At this point you will have the stringer marked but you need to make one final adjustment before cutting them out. You must reduce the bottom step by the width of your stair treads. If your using 2x material you need to cut 1.5" off the bottom step.
Now to cut out the stringers. When cutting out the triangles in the stringer be very careful to cut straight and on the waste side of the line. Neatness at this step will pay off in the finished stairs. Cut to the intersection of each triangle then finish the cuts with a handsaw or sawzall if you have one. Once you have one stringer cut out hold it up on edge at about a 30 degree angle and voila you will see exactly what your stairs will look like. If all is well with the first one you can trace the second one for an exact match.
When installing the stringers quite often you will need a ledger to nail your stringers to. This is because stairs are installed one step down and sometimes there is not enough to nail to at that point. A ledger board is usually a piece of plywood the width of your opening and high enough to reach to the bottom of the stringer. Once the ledger is nailed up we need to determine at what height to nail the stringers. Measure from top of the ledger down the amount of your rise plus the thickness of the tread. That will be the top of the stringer. From here it's only a matter of nailing or screwing your parts together to form your finished stairs.
Railings are required on most all stairs today. When building railings it is very important to check your local building codes.